Products | KTM | KTM 250 SXF | KTM 250 SXF 2011
Pro Circuit is pleased to introduce a new addition to their line of motorcycle accessories.The Pro Circuit Pit Rug is designed to give your pit setup the Factory look whileprotecting the ground and the environment at the same time. Adorned with Pro Circuitslegendary logos, this custom-crafted pit rug features a high-tech combination ofmaterials that quickly and easily absorb excess liquids. The tuft carpet providesadditional cushioning and comfort not found in the plastic mat versions, making this matMechanic Friendly. The plush top also helps reduce the chance of nuts and boltsbouncing away or getting lost in the dirt.Pro Circuit Pit Rug FIM Approved Tuft: 1/8 or 1/10 cut-pile Size: 110 x 240 cm Weight: 14 lbs Pile Composition: 100% PA bcf or PA mono Backing: Black standard vinyl Highly absorbent (water, oils, etc.) Dust controlling Crush and slip resistant Fire resistant Easy to maintain Washable
Ref: 0351225E & F
The Ti-5 Race Systems are constructed of titanium throughout the muffler can, header and mid-pipe areas. Designed for optimum performance, riders will enjoy increased horsepower while still meeting both AMA and FIM sound requirements. Unlike other Pro Circuit exhaust systems, the Ti-5 offers consumers the choice between a titanium or carbon fiber end cap. Additionally, the asymmetrical muffler configuration maximizes packing volume to ensure sustained performance. Asymmetric muffler designMeets 2012 AMA/FIM 2-Meter max sound testIncreased packing volumeAluminum muffler bracketTIG weldedComes with RC-4 Resonance ChamberMachined titanium mid-pipe to header jointOptional titanium or carbon fiber end capAdditional silencer packing kit included
Pro Circuit now offers a replacement Carbon Fiber End Cap for Ti-5 Exhaust System mufflers that originally came with a carbon cap. The Carbon End Cap was designed in house and are made with twill carbon fiber cloth. During manufacturing, the end caps go through an autoclave process that uses both heat and temperature to ensure that the parts are as dense, uniform and free of air bubbles as possible. This combination of high strength materials and advanced manufacturing processes allows Pro Circuit to make an extremely lightweight part that showcases the weave of the carbon cloth without sacrificing strength or durability.Replacement Carbon Fiber End CapMade with twill carbon fiber cloth Comes with Carbon End Cap, 2 Ti-5 stickers, 4 rivets and instructions Available for Ti-5 Exhaust Systems that originally came with a Carbon End Cap
Pro Circuit has built its reputation around the exhaust system. This legendary product is truly the core of our business, and were adding something new to the lineup. Pro Circuit is proud to announce the release of the new T-5 Carbon Euro System.The T-5 Carbon Euro System is constructed of stainless steel throughout the muffler can, header, and mid-pipe areas, and is topped off with a carbon fiber end cap to give it the same aesthetics as the Ti-5, but at a T-5-friendly price point. The asymmetrical muffler configuration maximizes packing volume to ensure sustained performance. Specifically for international customers, the T-5 Euro System meets the FIM 2 meter max sound requirements.Pro Circuit T-5 Carbon Euro System · Asymmetric muffler design· Increased packing volume· Aluminum muffler bracket· TIG welded· RC-4 resonance chamber· Machined stainless steel mid-pipe to header joint· Carbon fiber end cap· Additional silencer packing kit
Honda T-5 Slip-On Silencer Description: The T-5 stainless "Slip-On Silencer" was designed for a rider looking for an inexpensive, easy-to-install, lightweight performance silencer that can bolt right onto their stock head pipe. Honda T-5 Slip-On Silencer Features: Lightweight and durable Aluminum muffler bracket T.I.G. welded Asymmetric muffler design for increased packing volume Removable USFS approved spark arrestor and optional insert for closed course racing
The Ti-4R Race System is strictly for closed course competition. Our all new RC-4 Resonance Chamber has been added to the head pipe to reduce noise. (Note: The RC-4 Resonance Chamber, depending on year of your bike, might not come with the system). Please contact CGH Imports for information on replacement parts.Features Include:Strictly for closed course competitionNon Spark Arrested systemWelded Titanium End Cap (same as Team Pro Circuit)Meets AMA/FIM sound requirements of 94db.3 Piece system which inlcludes silencer, mid pipe and head pipe.New stronger Billet Aluminum Mounting bracket. Same exhaust system ran by Team Pro Circuit, Geico Powersports Honda, Troy Lee Designs Honda & Two-Two Motorsports.
The Ti-4R Replacement Head Pipes are hand welded and assembled to meet our strict quality standards. Comes equipped with a CNC machined exhaust flange for a perfect leak-free fit, and new for 2011 is the RC-4 Resonance Chamber to reduce noise output. Features Include:Fits 2009 TI-4R Race System & 2009 TI-4 GP SystemHand welded and assembled to meet strict quality standardsCNC machined exhaust flange for a perfect fitRC-4 Resonance Chamber reduces noise output
The T-4R Race System offers the same performance benefits as the Ti-4R Race System in a stainless and aluminum package. New for 2011 is the RC-4 Resonance Chamber to reduce noise output. (Note: The RC-4 Resonance Chamber, depending on year of your bike, might not come with the system). Please contact CGH Imports for information on replacement parts.Features Include:Strictly for closed course competitionNon spark arrested systemWelded end capMeets AMA/FIM sound requirements of 94db3 piece system which inlcludes canister, mid pipe and head pipeNew stronger billet aluminum mounting bracket on canister CNC machined exhaust flange on head pipe for a perfect fitUltra-strong mounting bracket on mid pipe for extended product life
The T-4R Replacement Head Pipes are hand welded and assembled to meet our strict quality standards. Comes equipped with a CNC machined exhaust flange for a perfect leak-free fit, and new for 2011 is the RC-4 Resonance Chamber to reduce noise output. Features Include:Fits 2009 T-4R Race System & 2009 T-4 GP SystemHand welded and assembled to meet strict quality standardsCNC machined exhaust flange for a perfect fitRC-4 Resonance Chamber reduces noise output
The GP-1 EVO with GPA is an engine control unit for four-stroke fuel injected motorcycles. The GP-1 EVO with GET Power Assistance is easy to install and has pre-set maps that offer incredible power gains and better throttle response. Easy and Quick plug & play fitting Improve your engine performance Better Throttle Response Dynamic power management with the "GET Power Assistance" GPA System Programmable GPA ready-made system with 9 preset operating levels (with VT1 device or with EVO/Advanced software license)
Introducing the Pro Circuit KTM Triple ClampsDeveloped Exclusively for Select KTM ModelsThe triple clamp has been re-mastered. The new Pro Circuit KTM Triple Clamps are everything youve wanted and more from a suspension accessory. Race team looks and options for customization are just a few things weve been toiling with, and we know youll love what weve come up with. The Pro Circuit KTM Triple Clamps are leaving old-school clamp designs in the dust. Isnt it time you upgraded? RACE TEAM READYThe clear anodized finish gives the Pro Circuit KTM Triple Clamps a works look, and creates a durable finish that helps retain the like-new luster. The legendary Pro Circuit Race Team currently uses the same design on its championship-winning machines. KEEP IT CUSTOMIZEDThe Pro Circuit KTM Triple Clamps incorporate a light and compact reversible bar mount that allows you to choose from one of four mounting positions, and gives you the ability to customize the ergonomics of your machine. The Pro Circuit KTM Triple Clamps are only available for select KTM models. Additional product specifications are included below. Pro Circuit KTM Triple Clamp*Available for select KTM models (see fitment below) *Made in the USA *Engraved with the iconic Pro Circuit logo on both the top and bottom clamp *Manufactured out of billet 6061 Aluminum *Bar mount is offset 5mm to allow for handebar adjustment in either one of two different bar mount positions *Bar mount is reversible for a total range of 30mm of articulation *Available for 1 1/8" handlebars *Bottom clamp includes pre-assembled steering stem and bearing *Kit includes: Clear anodized top clamp, clear anodized bottom clamp, black bar mount, Pro Circuit stickers for further customization *Fitment: '11-12 350SX-F, 10-12 125-250SX, 10-12 250/450SX-F, 10-12 300XC
A must-have item for any off-road motorcycle, the Pro Circuit Clutch Springs will increase the clutch life, prevent clutch slipping, and has improved engagement over a stock setup for any rider. Now available for select KTM models, these high-performance springs will help to keep engine temperature down. Riders will notice consistent spring performance throughout time, which is crucial in controlling how efficiently the clutch turns power into acceleration. Pro Circuit Clutch Springs for KTM 250SXF*12-15% stiffer than stock *More positive clutch engagement *Prevent clutch slipping *Consistent spring performance *Control how efficiently the clutch turns power into acceleration *Sold as a set *Available for select KTM models
KTM Linkage Arm. The KTM Linkage Arm was designed to stiffen up the initial part of the linkage curve and lower the chasis, making the bike much more stable. This will also help eliminate the initial loose and wallowy feel. Turning and cornering capabilities are greatly improved as well. And although having your suspension revalved by Pro Circuit would make a considerable improvement, the Linkage Arms alone provide a major improvement over the stock set up. *Stock Length for the KTM 250/350/450 SX-F (142.5mm) / Pro Circuit Length is 143.75mm
KTM High Compression Piston KTM 250 SX-F 2011.By using a Pro Circuit high-compression piston you will gain both low-end torque and top-end power. Pro Circuit High-compression pistons work equally well on stock or modified motors giving you more power at every rpm. Each kit contains piston, rings, wrist pin and clips. Pistons vary in price based on model.
The new Pro Circuit Launch Control device has been revamped with rider experience in mind. When engaged, the Pro Circuit Launch Control device will help compress the forks on a consumers bike down from the normal position. Utilizing the Pro Circuit Launch Control, more load is being placed on the front end instead of the rear, lessening the chance of a wheelie out of the gate.The next generation in start devices, the Pro Circuit Launch Control features a springless design that delivers positive engagement and consistent release. The newly designed start trigger eases the setting and disengaging process, and helps to simplify installation of the entire kit. Every Pro Circuit Launch Control device is CNC machined exclusively from aircraft-grade aluminum for a lightweight improvement to every racers bike.CNC machined exclusively from aircraft grade aluminum Lightweight, complete assembly only 50 grams Custom drill guide template and countersinking tool included Detailed installation instructions include large step-by-step photos Laser etched logo Engineered, manufactured and assembled in the USA Launch Control Features: Springless design that delivers positive engagement and consistant release Start trigger eases the setting and disengaging process CNC-machined out of aircraft-grade aluminum Light-weight
Ref: Peg - Armor
Peg Armor prevents mud and debris from packing into the footpeg mount area and spring mechanism ensuring your footpegs will return to their standard horizontal position. T300 series 304 Stainless Steel and TIG welded construction for built-in durability and strength. Simple bolt on installation in minutes.* Prevents mud and debris from packing into the footpeg mount/spring * T300 series 304 Stainless Steel for durability * TIG welded one piece design for strength * Custom fit for each make/model * Bolt on design for easy installation * Made in the USA
* One piece cast 6AL-4V Titanium construction yields superior strength and lighter weight than welded Ti pegs * 55mm wide platform with triple cleat design for improved impact dispersion * Open cleat feature to minimize mud buildup * Raised outer teeth for additional grip * Up to a half pound weight savings over stock * Made in the USA
The Next-Generation in start devices Spring-less design delivers positive engagement and consistent release Easy set by rider start trigger CNC machined exclusively from aircraft grade aluminum Lightweight, complete assembly only 50 grams Custom drill guide template and countersinking tool included Detailed installation instructions include large step-by-step photos Laser etched logo Engineered, manufactured and assembled in the USA Patent Pending
Ref: Banjo Bolts
Banjo bolts are sold in pairs and designed to fit any motorcycle application. Bolts feature pre-drilled holes for safety wire. Bolts are machined from aircraft grade aluminum with a red anodized finish.
Fits Most KTM WP USD Forks .*EZ push-button operation eliminates harsh, built up air pressure instantly. *Relieving air pressure allows your suspension to operate as designed .*Compatible with KTM WP upside-down forks equipped with stock bleeders screws .*Simple installation replaces stock bleeder screws in minutes .*Two bleeder valves with adapters included in set .
Pivoting action to prevent damage from impactsDurable forged lever blade and CNCd 6061 T-6 billet construction Tight manufacturing tolerances eliminate up and down play in the leverAdjustable reach for a custom fitQuality hardware throughout the designAnodized Stealth Black with laser etched logoEZ install in just minutes. No special tools required
Ref: 24-020 - 24-021
CNC machined from 6061 T-6 aluminum Replaces the stock plastic plug Sealing O-ring includedAnodized Orange or BlackMade in the USA
Ref: 31-100 - 31-500
CNCd 6061 T-6 aluminum Incorporates a nylon sleeve to allow brake assembly to rotate upon impact Available in Blue, Red, Black, Silver, or Orange anodized colors Made in the USA
Ref: 21-040 - 21-045
CNC machined from billet aluminum to exacting specifications Polished to a mirror finish prior to anodizing Engraved logo Available in Orange or Black anodized finish Made in the USA
Ref: 21-050 - 21-055
Fits all.Lets air supply into the fuel tank, but stops fuel from coming outInstalls in place of the stock overflow hose in secondsCNC machined from 6061 T-6 billet aluminumAnodized rich Midnight Black with distinctive laser etched WC logoDurable 19mm long mounting hose included
* Allows "No tools" tuning to obtain crisp, clean, positive off idle throttle response* CNCd 7075 T-7 billet aluminum to precision tolerances* "EZ Dial" knob with laser etched numerals * O-ring design helps resist engine vibration to increase product accuracy and longevity* Brilliant Red anodized color
Premium design includes Works Connection hand screened logo 1½ inch wide U.S. made 6000 lb.test abrasion resistant nylon webbing Heavy-Duty Powertye Cam-lock Powertye Soft-Tye extension sewn in to protect your handlebars Vinyl coated S-Hook for Soft-Tye Vinyl coated secure Latch-hook at bottom for added security Double security stitching 1,000 lb. rated assembly strength Black with Red Powertye Soft-Tye extension 6½ ft. length Sold in pairs
Ref: Works Stand Regular
Pro Circuit Works stands have been a factory favorite for many years. Works stands are available for minibikes and standard-sized motorcycles. Stands feature a non-slip rubber top and are built from extruded aluminum for durability and light weight. Pro Circuit makes accessory side panels for both the mini and standard Works stands. Side panels are made from aluminum and have a high-strength 3M decal to provide a surface for riders and mechanics names.
Ref: Cable Guide
Hi-impact plastic and mounts easily to your front number plate.
Ref: Temp Strips
Pro Circuit Thermostrips allow you to monitor the running temperature of your motor, shock or radiators to make sure you are not losing power due to overheating. Three thermostrips per pack.
Large, easy to read LCD screen Ultra-compact 1 x 2 design Tach displays current RPM anytime engine is active Records max RPM reached every ride Measures up to 20,000 RPM Hour meter tracks total hours up to 99,999 Spinning arrow icon displays while engine is active Adjustable settings for Fast/Slow updates Adjustable High/Low spark sensitivity for electrical noise suppression Mounts anywhere with heavy duty, die-cut Peel-n-Stick (included) Optional Mount Bracket available for bolt on (sold separately) Easy installation (single wire lead wraps around spark plug wire)
The Pro Circuit hour/tach meter tracks the service life of your motor for oil changes, valve adjustments, spark plugs, etc. Works on any engine up to two cylinders. Everything is included for easy installation. No batteries are required.
Easy to install and cheap when compared to the price of a new brake pedal. Includes all hardware and 10mm and 8mm tabs.
Winner of our strangest call-in question: The guy who wanted to know what sizes our umbrellas came in. People: it's an umbrella. Pro Circuit being based in Southern California, almost every weekend they are out there somewhere else...and lots of times it rains. If they can figure out how to win that many #1 plates over the years....we can figure out how to get out of the rain. This is the umbrella they use.
Provides plenty of leverage and keeps springs from shooting all the way across the garage! Perfect addition to any toolbox.
Made from lightweight aluminum and designed to hang from your toolbox for quick and easy access to your complete set of t-handle tools.Designed to sit on the lip of your toolbox for easy access and holds all 7 of you T-handles.
Ref: Tape Measure
Pro Circuit key ring / tape measure.Total length 100cm / 39 inches The Pro Circuit Keychain/Taper measure is probably the absolutely most highly prized item in the MX/SX world. Here's why: guys buy this keychain. Then they have their hair dyed red, an ortho makes them shorter by removing spinal discs, then they top it off with plastic surgery. End result: they look just like Ryan Villopoto. After a race, they go to a bar, toss the Pro Circuit Keychain on the counter...chicks fight over who gets to be first...and well....you know the rest.
T-4R Replacement Decal Kit. 09-10 T-4R System Decal Kit (Will fit all Pro Circuit 4 inch Exhaust syatems). *comes with end cap decal
Ti-4R Replacement Decal Kit. 2009-2010 TI-4R System Decal Kit (Fits all 4 inch canister Pro Circuit exhaust systems and decals). *Comes with End Cap Decal
T-4 Silencer Replacement Decals replace old, damaged or worn stickers and Tags. Specially made for high temperatures. No hardware required, just stick and ride.
Ti-4 Silencer Replacement Decals replace old, damaged or worn stickers and Tags. Specially made for high temperatures. No hardware required, just stick and ride.
Ref: DCT4E & DCTI4E
Replacement End Cap Decals (high temperature)
Original Logo Sheet has assorted sizes of the original Pro Circuit logo.
Stickers! Stickers! No toolbox, refrigerator or slow moving pedestrian is safe.This is a GENUINE Pro Circuit Deluxe Logo Sheet 13in. x 19.50in. tall.(BEWARE OF PEOPLE SELLING COPY STICKERS)
Ref: Ceramic Mug
Absolutely the best way to get a holeshot on your day. The Pro Circuit ceramic mug has a whopping 500cc capacity, which is almost exactly the same amount that your average, basic cup of coffee can hold. Available in a rainbow of colors, as long as your rainbow is only black. Each cup is tested on the dyno by our crack staff of caffeine addicts.
Ref: DC0005 to DC0040M
Pro Circuit front fender decals are 12 mil. thick vinyl decals with a super-sticky backing - perfect way to add style to your bike!
Ref: DC009H & DC009MH